The 150 Collection Product Specifications

Frame
The wooden frame on this collection is composed of beech wood and ash. These woods are selected at source and seasoned for a minimum of 2 tears to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame. Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.
Suspension Unit
We incorporate in our suspension unit; heavy duty nine gauge sinuous spring steel. These “S” shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. We will continue to use heavy duty European elastic webbing to support the back and seat cushions only. This material holds 720 pounds of pressure per square inch. In addition: we use two solid wooden stretchers that runs front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.
Leather: 150 Whiskey
The leather on this model is semi aniline. This means that the leather is colored thru and thru and does possess a light coat of polyurethane finish on the surface of the leather. This gives the consumer versatility in wear and use. The most common household stains can be easily cleaned with a damp cloth and mild soap if addressed within minutes of the spill, spot or stain. The grain texture on this leather is natural and antiqued. This leather is designed and marketed to resemble an old world distressed look and feel. You will notice some color variations and grain variations between each piece and sometimes within the same piece. These are natural characteristics and should not be considered unusual.
Cushions & Seating
The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper on the surface for comfort. The density of these cushions will vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are composed of Dacron fiber which is blown in to vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time.
Sales Features and Benefits of the 150 Collection
This model is designed for the consumer that is looking for the “LOFT” look. It is urban and considered to be casual traditional. The pieces are all very American with pinpoint design and style. The antiqued whiskey leather will match virtually any décor and color scheme. You will find the comfort and pitch of this collection to be simply perfect. This collection has been one of our top performers year in and year out.

The 2519 Collection Product Specifications

Frame
The wooden frame on this collection is composed of beech wood and ash. These woods are selected at source and seasoned for a minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame. Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors
Suspension Unit
We incorporate in our suspension unit; heavy duty nine gauge sinuous spring steel. These “S” shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. We will continue to use heavy duty European elastic webbing to support the back cushions only. This material holds 720 pounds of pressure per square inch. In addition: we use two solid wooden stretchers that run front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.
Leather: 2519 Saddle
The leather on this collection is semi aniline. This means that the leather is colored thru and thru and does possess a light protective coat of polyurethane finish on the surface of the leather. This gives the consumer versatility in wear and use. The most common household stains can be easily cleaned with a damp cloth and mild soap if addressed within minutes of the spill, spot or stain. Please notice how the color moves throughout this leather. You will see dark tones and light tones all over the furniture. These are characteristics of high quality leather. This effect is called “sauvage”
Cushions & Seating
The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper on the surface for comfort. The density of these cushion’s vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are composed of Dacron fiber which is blown in to vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time.
Sales Features and Benefits of the Chelsea Collection
This model is a classic, urban, retro design all wrapped up in one beautiful collection. The arm gives you a look of an old rustic retro era. The comfort and pitch as always is truly “American” We accented the back cushions with a unique stitch pattern. This lightly contrasting stitch also will add a nice clean detail to the product. The solid wooden foot also gives you an old world feel. If you are looking for an occasional bedroom chair or a reading chair the 2519 chair would definitely work for you. We sell a lot of these chairs as occasional chairs as well.

The 2511 Collection Product Specifications

Frame
The wooden frame on this collection is composed of beech wood and ash. These woods are selected at source and seasoned for a minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame. Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.
Suspension Unit
We incorporate in our suspension unit; heavy duty nine gauge spring steel. These “S” shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. We will continue to use heavy duty European elastic webbing to support the back cushions only. This material holds 720 pounds of pressure per square inch. In addition: we use two solid wooden stretchers that run front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.
Leather: 2511 Havana
The leather on this model is semi aniline. This means that the leather is colored thru and thru and does possess a light protective coat of polyurethane finish on the surface of the leather. This gives the consumer versatility in wear and use. The most common household stains can be easily cleaned with a damp cloth and mild soap if addressed within minutes of the spill, spot or stain. You will notice the color movement in this beautiful leather. The sauvage or cloudy effect is very unique. This shade of brown with a slight blackish tint will work in any home environment.
Cushions & Seating
The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper on the surface for comfort. The density of these cushion’s vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are composed of Dacron fiber which is blown into vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time.
Sales Features and Benefits of the 2511 Collection
This model is a classic design that is timeless. It is a beautifully detailed group and each antiqued stud is applied one at a time by hand. The solid wooden feet really accent each piece. This group will work in any environment from casual contemporary to traditional. The sauvage effect in the leather also adds to its rich look and feel. This collection lend’s itself well to the “LODGE” look. It has a unique stitching design on the seat and back cushions. The cushions are slightly more firm by design. If you are look a rustic, old world, lodge look. The 2511 Collection is sure to please.

The 2520 Collection Product Specifications

Frame
The wooden frame on this collection is composed of beech wood and ash. These woods are selected at source and seasoned for a minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame. Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.
Suspension Unit
We incorporate in our suspension unit; heavy duty nine gauge sinuous spring steel. These “S: shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. We will continue to use heavy duty European elastic webbing to support the back cushions. This material will hold 720 pounds of pressure per square inch. In addition: we use two solid wooden stretchers that run front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.
Leather: 2520 Choca
The leather on this collection is semi aniline. This means that the leather is colored thru and thru and does possess a light protective coat of polyurethane on the surface of the leather. This gives the consumer versatility in wear and use; most common household stains can be easily cleaned with a damp cloth and mild soap if addressed within minutes of the spill, spot or stain. You will notice some color variation and grain variations between each piece and sometimes within the same piece. These are natural characteristics and should not be considered unusual. This leather is buttery soft and will work in any décor or color scheme at home.
Cushions and Seating
The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper for comfort. You will find the density of the seat cushions will vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are composed of Dacron fiber which is blown by computer into vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time.
Sales Features and Benefits of the 2520 Collection
This model is a classic design that seems to always be in style. It is a beautifully detailed group and each stud is applied by hand one at a time by a talented craftsman. The solid wooden feet really accent each piece. This group will work in any environment from casual contemporary to traditional. The smaller rolled arm and unique diamond seat and back cushions give this collection charisma and character.

The 288 Collection Product Specifications

Frame
The wooden frame on this collection is composed of beech wood and ash. These woods are selected at source and seasoned for minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame.
Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.
Suspension Unit
We incorporate in our suspension unit; heavy duty nine gauge sinuous spring steel. These “S” shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. We will continue to use heavy duty European elastic webbing to support the back cushions only. This material holds 720 pounds of pressure per square inch. In addition: we use two solid wooden stretchers that runs front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.
Leather: 288 Vanilla
The leather on this collection is semi aniline. This means that the leather is colored thru and thru and does possess a light protective coat of polyurethane finish on the surface of the leather. This gives the consumer versatility in wear and use. The most common household stains can be easily cleaned with a damp cloth if addressed within minutes of the spill, spot or stain. This color will offer the consumer outstanding versatility as it could go into any environment with any color scheme or design idea. The Vanilla color can go into a sun room or in a living room with ease knowing it will match virtually any décor.
Cushions & Seating
The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper for comfort. The density of these cushion’s vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are composed of Dacron fiber which is blown in by computer to vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time.
Sales Features and benefits of the 288 Collection
This collection is urban, classic and retro all wrapped in into one beautiful collection. The arm on this collection gives you an urban loft feel with the sleek low lines. The comfort and pitch of this product is unquestionably American and the dark contrast stitch offers a unique and different approach to style and design. The solid wooden foot also is noticeable and will match any décor. You will not find plastic feet here as with other product. Please feel free to set this product alone in a room as the backs and the sides are tailored as beautifully as the front.

The 154 Collection Product Specifications

Frame
The wooden frame on this collection is composed of beech wood and ash. These woods are selected at source and seasoned for a minimum of 2 tears to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame. Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.
Suspension Unit
We incorporate in our suspension unit; heavy duty nine gauge sinuous spring steel. These “S” shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. We will continue to use heavy duty European elastic webbing to support the back and seat cushions only. This material holds 720 pounds of pressure per square inch. In addition: we use two solid wooden stretchers that run front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.
Leather: 154 Vintage
The leather on this model is semi aniline. This means that the leather is colored thru and thru and does possess a light coat of polyurethane finish on the surface of the leather. This gives the consumer versatility in wear and use. The most common household stains can be easily cleaned with a damp cloth and mild soap if addressed within minutes of the spill, spot or stain. The grain texture on this leather is natural and antiqued. This leather is designed and marketed to resemble an old world distressed look and feel. You will notice some color variations and grain variations between each piece and sometimes within the same piece. These are natural characteristics and should not be considered unusual.
Cushions & Seating
The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper on the surface for comfort. The density of these cushions will vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are composed of Dacron fiber which is blown in to vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time.
Sales Features and Benefits of the 154 collection
This model is designed for the consumer that is looking for the “LOFT” look. It is urban and considered to be casual traditional. The pieces are all very American with pinpoint design and style. The antiqued vintage leather will match virtually any décor and color scheme. The individual studs are applied by hand one at a time by a talented craftsman. We have taken the 150 frame and 150 comfort; which continues to be our best seller every year and we have modified it. We took the welting off, added the very successful “diamond “ designed back cushion and put the 2520 stud on it. This gives us a frame that has the best characteristics of two of our best sellers. This collection is sure to be a huge success. The 154 Vintage leather is deep burgundy and of the same article as 150 Whiskey so it will resemble it in every way.